Environmental friendly air coolers

Eco-Cooler Jet Stream Range
250 to 750 Watt.
This system has beenmanufactured for ease of use. It is an air-cooled system based around the rising
sun super reflector. It has 2 x 125mm flanges. One is mounted on the ignitor housing,
which has small holes punched on one side and 4 large jet holes on the lamp holder
side. At the opposite end of the reflector there is one large hole with a 125mm flange.
round the bottom of the reflector is a heavy duty galvanised frame which houses the 4mm toughened
safety glass, which has a Class A impact performance to BS 6206 and offers greatly increased resistance to sudden temperature changes compared with annealed glass.
   
 It can also be used in service within the temperature range from 280 degrees
Celsius down to minus 70 degrees Celsius without affecting its performance and can also
withstand sudden shock temperature of approximately 200 degrees Celsius.
If ever the glass is broken it disintegrates into relatively harmless small pieces.
This framework has a rubber seal to protect the glass edge and to seal the whole unit so that
the hot air is never in your room. The framework drops down via two wing nuts and slides to one
side for easy cleaning of the glass.
The air blows vi the ignitor housing and out over the length of the lamp through the flange at
the other end of the reflector.
Recent tests showed that with an anbient temperature of 20 degrees Celsius, and using a 600
watt system with a 125mm extractor fan, the temperature recorded was 27 degrees Celsius at a
distance of 0.5 metre below the glass.
The Eco-cooler Jet Stream systems are manufactured to a high standard using quality components.
All control boxes are manufactured from 1mm steel and are epoxy powder coated in blue.
All boxes are vented at the top and bottom to allow airflow to ensure cool running, giving a
longer component life.
All Eco-Cooler Jet Stream systems are manufactured in accordance to BS EN 60598-1.
The external cable is manufactured from rubber neoprene 1.5mm H07RNF. The internal wire is
high temperature silicone 1.5mm.
These systems come with 2 metres of cable from the moulded plug into the box and 4 metres
out of the box to the reflector. Longer lengths can be built into the system upon request, which
will be charged at cost.
These systems can be remoted as far as 150 metres!
This system comes with a choice of reflectors of a parabolic design. The material is highly
polished anodised dimpled aluminium with a vented 3mm aluminium heat sink running along
the top of the reflectors to draw heat away from the lamp. The reflectors give a very even spread
of light.
The ignitor is mounted in it's own housing behind the lamp, which is detachable from the
reflector via two wing nuts for ease of use.
These systems can be manufactured for almost any electric supply.
Re-strike of hot lamps on mains failure
This is dependent on temperature and lamp type.
The re-strike time is between 30 seconds and 20 minutes. If the lamp is not relit after 20
minutes, then the system will shut down as the lamp is obviously faulty.
Eco-Cooler Jet Stream comes with a 4 year warranty on all components excluding the lamp, so
long as the equipment has not been tampered with or altered in any form.
These systems are supplied with a choice of Sylvania Grolux or Osram Nav-t super lamps. They
are also suitable for use with metal halide lamps with the exception of the 750 watt